Skip to content
AiX
AiX Academy

PCB design & prototyping

From breadboard to a board you designed, routed, and assembled.

Intermediate
4.14.1 out of 5 stars from 8 ratings(8 ratings) 12 learners

Created by Tshega Mampshika

  • Last updated November 2026
  • English
  • Certificate of completion

What you'll learn

  • Draw a schematic and turn it into a two-layer PCB layout
  • Apply design rules for clearance, trace width and vias
  • Order a prototype board and check it on arrival
  • Assemble and test a board with surface-mount parts

Skills you'll gain

  • PCB layout
  • Schematic capture
  • Design rules
  • Soldering
  • Prototyping

Part of these pathways

Course content

1 section · 6 lectures · 12.5 total hours · ≈ 2 MB to download

Module 1 6 lectures · 12 h 30 min
  • Schematic capture — from breadboard to CAD Locked until you enrol 2 h · < 1 MB
  • Layout — placing parts with intent Locked until you enrol 2 h · < 1 MB
  • Routing a two-layer board Locked until you enrol 2 h · < 1 MB
  • Decoupling, ground pours, and design judgement Locked until you enrol 2 h · < 1 MB
  • Manufacturing files and ordering Locked until you enrol 1 h 30 min · < 1 MB
  • Assembly — surface-mount by hand Locked until you enrol 3 h · < 1 MB

Requirements

  • Completed Electronics and circuit craft, or equivalent
  • Basic soldering skills, or willingness to learn

Description

Six weeks taking a circuit from breadboard to a professional printed circuit board.

You will capture schematics, route two-layer boards, generate manufacturing files, and hand-assemble your own design with surface-mount parts. We cover the practical judgement that tutorials skip: decoupling, ground pours, connector choice, and design-for-repair in field conditions.

Every learner leaves with a working board of their own design — usually the moment the word engineer starts to feel earned.

Who this course is for

  • Learners in the age group: Ages 15+
  • Intermediate-level learners

Instructor

Tshega Mampshika

Co-founder and CTO, AlgoAtWork

  • 14 courses
  • 257 learners

Tshega leads technology at AlgoAtWork, the company behind AiX Academy. Tshega leads the robotics, electronics and hardware courses and reviews the design of each pathway.

4.1 course rating · 8 ratings

4.14.14.1 out of 5 stars from 8 ratings8 ratings
  • 5 stars38%
  • 4 stars38%
  • 3 stars25%
  • 2 stars0%
  • 1 star0%
  • Bongani Dube
    5.05.0 out of 5 stars from 1 ratings

    The worked example of a motor driver board was well explained.

  • Lindiwe Sithole
    4.04.0 out of 5 stars from 1 ratings

    Good course. The reflow soldering demo was helpful to watch.

  • Aisha Hendricks
    4.04.0 out of 5 stars from 1 ratings

    Solid course, though fabrication costs are not included.

  • Fatima Ismail
    3.03.0 out of 5 stars from 1 ratings

    More practice boards to test would make the course stronger.

  • Thabo Mokoena
    5.05.0 out of 5 stars from 1 ratings

    Clear on footprints and clearance. I used the course board as a template.

  • Themba Zwane
    4.04.0 out of 5 stars from 1 ratings

    The schematic capture lessons are short but dense. Worth rewatching.

Frequently asked questions

Which design software is used?

The course uses KiCad, which is free and runs on Windows, macOS and Linux.

Are fabrication costs included?

No. Board fabrication is paid to the manufacturer. The course shows how to estimate the cost first.

Learners also bought

Browse all courses
R3 900PCB design & prototyping