Robotics bootcamp
Five intensive days. Walk away with a working prototype.
Created by Tshega Mampshika
What you'll learn
- Assemble a drive base with motors, wheels and a chassis
- Read line and distance sensors and act on what they report
- Tune a control loop so the robot stops wobbling
- Compete in race day and debrief what went wrong
- Work in a team with a clear build and test routine
Skills you'll gain
- Robotics
- Motor drivers
- Sensors
- Control tuning
- Teamwork
Part of these pathways
Course content
1 section · 5 lectures · 25 total hours · ≈ 2 MB to download
Module 1
- Day 1 — electronics fundamentals and the chassis Locked until you enrol 5 h · < 1 MB
- Day 2 — motors, drivers, and making it move Locked until you enrol 5 h · < 1 MB
- Day 3 — sensors: seeing the line Locked until you enrol 5 h · < 1 MB
- Day 4 — control logic and tuning Locked until you enrol 5 h · < 1 MB
- Day 5 — race day: calibrate, compete, debrief Locked until you enrol 5 h · < 1 MB
Requirements
- Basic reading and maths skills
- Interest in building and testing things
Description
Five days, one chassis, one working robot at the end. No filler lectures — wire it, flash it, tune it, race it.
Each day builds on the last: electronics fundamentals, motor control, sensors, then a full line-following robot that you calibrate and race on the final day. You will write real code in the Arduino IDE and debug real hardware when it misbehaves — because it will, and that is the point.
Delivered at our labs and partner venues across six provinces. Learners keep their build documentation and a parts list so they can rebuild at home or at a school club.
Who this course is for
- Learners in the age group: Ages 9–25
- Beginner-level learners
Instructor
Tshega Mampshika
Co-founder and CTO, AlgoAtWork
- 14 courses
- 257 learners
Tshega leads technology at AlgoAtWork, the company behind AiX Academy. Tshega leads the robotics, electronics and hardware courses and reviews the design of each pathway.
4.2 course rating · 5 ratings
-
Naledi Maseko
Good structure, but some sessions ran late. Plan lunch around the schedule.
-
Ruan Coetzee
Race day was the highlight, and the debrief afterwards was useful for the whole team.
-
Keabetswe Mokgosi
A bit noisy for quiet learners, but the teaching team was patient.
-
Fatima Ismail
Five days that changed how my daughter sees engineering. She now wants to enter the regional competition.
-
Sizwe Mthembu
The motor and sensor lessons were solid. Control tuning was the hardest session and the best.
Frequently asked questions
How long is each day?
Roughly seven hours including breaks and lunch. The schedule is sent before the course starts.
Do learners need their own laptop?
No. The bench computers have the software installed.